If you spend too long in the tanning bed, even 1 minute too long, your skin will begin to peel and you will have to start the process all over again. Use a tan accelerator when in the tanning bed to help your tan develop faster, and to protect your skin from drying out. Skin type 2 is also prone to burning, so you need to practice caution. If at any point in the sunbed session you feel your skin burning or becoming uncomfortable, you should end the session.
You need to build up your base tan in small increments, to prevent burning and peeling. You should also use a tan accelerator to make the most of your short tanning sessions, while still giving your skin the extra nourishment that it will need. This skin type still needs to be cautious when tanning in a sunbed, but their sessions can be slightly longer than the first two types. The process should not be rushed, and tanning should be done in short sessions.
With this skin type, you will notice results quickly, but do not push this, as your skin is still likely to burn from overexposure. Once again, you should use a tan accelerator to help your skin darken in this short amount of time and to help deliver nourishment and nutrients to your skin, which will dry out under the UV rays.
Skin type 4 is able to spend longer in the tanning bed, but results will happen quickly, so you will not have to spend too much time in the tanning bed. A tan accelerator will do absolute wonders for your skin and will be able to darken your skin in short sessions. The additional nourishment that a tan accelerator will give your skin will help the tan glow for a good amount of time and prepare your skin well for the next session.
The sessions for skin type 5 are still fairly short, but this is for 2 reasons. The first is that you will still be susceptible to damage from the UV rays, so limiting time is important. The second is that you are likely to see results fairly quickly, so short sessions are all you need.
You do not need to spend excessive amounts of time in a tanning bed, and a tanning accelerator will help you develop a gorgeously dark tan without having to spend too much time under the UV lights. No matter your skin type, you will need to care for your skin after tanning. Once you leave the tanning bed, your skin will continue to tan and still produce melanin for at least 12 hours. Using a tan accelerator will help to keep your skin hydrated both during the tanning session and in the hours following.
For the fairer skin types, you might want to use an aloe vera gel to cool your skin and to prevent it from peeling, as you will more than likely feel the effects of the sunbed well after your session has ended. Most tanning professionals will recommend that the first 3 indoor tanning sessions be done in one week until a base tan is developed.
After this, 2 tanning sessions a week can be done to darken the tan and to maintain the glow. For most skin types, a few indoor tanning sessions will be required for your skin to oxidize the melanin and result in darker skin. Start slowly and gradually increase your indoor tanning exposure over time.
Some indoor tanning facilities start all new customers off with 5-minute tanning sessions and gradually increase to minute or longer sessions. Because indoor tanning lamps differ in UV strength and output, there is no formula for comparing indoor and outdoor exposure times.
Consult the facility's staff to help you determine optimum exposure times. Wait at least 48 hours between tanning sessions to avoid skin damage. Daily UV exposure can cause skin damage. However, if you wait too long between indoor tanning sessions, your tan may start to fade. Most indoor tanning professionals recommend 3 indoor tanning sessions a week until a tan is developed, and then 2 each week after that to maintain the tan.
Avoid overexposure. You can tell if you have gotten too much UV exposure if your skin starts to sting while tanning. Stop tanning as soon as you feel any prickling or stinging sensations on your skin.
Prepare your skin for indoor tanning. Exfoliate your skin daily for 1 week before your first indoor tanning session. You also may use a commercial exfoliating kit, available at most beauty outlets and drug stores. When you exfoliate, you are removing dead skin and creating a smooth surface for tanning. Lotions designed specifically for indoor tanning will maximize your tanning efforts.
Apply the lotion in circular strokes all over your body for even coverage. Do not use outdoor tanning lotions, which can damage indoor tanning beds.
Determine what to wear during tanning. What garments you wear during tanning is personal preference. Some people prefer to wear bathing suits or undergarments, while others choose to wear no clothing. Check with the professionals at your tanning facility to determine if there are any clothing requirements for tanning bed use. Remove all jewelry before tanning.
If you wear a watch or other jewelry, you will have white spots where the jewelry rested against your skin. For an even tan, remove all jewelry before indoor tanning. Remove eyeglasses and contact lenses prior to tanning. The heat generated from the tanning bed can damage contact and eyeglass lenses. Protect your eyes from UV rays.
The U. FDA requires eye protection while utilizing an indoor tanning device. Avoid looking at UV rays from the tanning equipment.
Repeated exposure to indoor tanning UV rays could cause night blindness, retinal ulcers, and blindness. Avoid cosmetics and perfumes while tanning. Many cosmetics and perfumes contain ingredients that make you sensitive to light.
These photosensitive ingredients could result in rashes, blotching, burning sensations or uneven tanning. Wash off all cosmetics and perfumes before tanning. Make small adjustments in your body position while you tan.
Don't lay completely still in a tanning bed, but move your arms and legs slightly to maximize exposure to all parts of your body. Do not rest your chin against your chest while you are reclining. This will result in a white spot under your neck because your chin blocked the UV rays.
For an even tan, lay your head back, allowing exposure to all parts of your face and neck. Moisturize after an indoor tanning session. Skin that is moisturized will retain a tan longer than dry skin. Apply a body lotion immediately after each indoor tanning session, and moisturize after every shower or bath. Choose a lotion based on your skin type. Select a deep-penetrating lotion for dry skin and a lightweight lotion for normal to oily skin.
Avoid showering immediately after a tanning session. Wait for at least 3 or 4 hours after tanning to allow the skin's melanin to become fully stimulated. Avoid items that can cause a tan to fade. Every 30 days, the skin sheds its epidermis, which means your tanned skin fades naturally every 30 days.
Hot water, indoor heating, and harsh soaps increase the fading process. Keep a tan from fading by moisturizing the skin every day, using mild cleansing products, showering in warm water and increasing your daily water intake.
You can, though most people tan in the nude. It really just depends on whether or not you want those tan lines. Yes No. Not Helpful 9 Helpful If I'm tanning for the first time with light skin, how many minutes should I go for?
Start by going for 5 minutes or less, every few days. Find out when the tanning lamps were last changed. Manufactures estimate the lamp life at between hrs. It is most important to know that strength. Lamps are at peak strength for hrs. At Perfect Tan lamp hrs. This layer contains cells called melanocytes which, when stimulated with ultraviolet UVB light, produce melanin. Melanin is the dark pigment found throughout the layers of the skin.
The melanin then moves up through the epidermis and is absorbed by skin cells. When exposed to UVA light, the melanin darkens, producing a tan. Not necessarily. The skin needs a few tanning sessions to allow the skin to oxidize its melanin, darken and produce a tan. This process cannot be rushed. Your tan will begin to deepen within sessions, depending upon the amount of melanin within your skin.
Consider adding a custom airbrush to your uv sessions to achieve a darker appearance more quickly. If repeated sun burns, and frequent exposures are needed to get an outdoor tan, it may be possible to acquire an indoor tan without the burning that is often associated with the tanning process. You would need to begin with a short exposure time, and increase it very gradually. Consistency is also important. However, if you NEVER tan from the sun, you will not tan from tanning lamps, since they emit the same spectrum of tanning rays as the sun does.
In order to build a tan, tan regularly. It is suggested that you wait 48 hours in between each session to allow your tan to fully develop in between visits. You can build up your tan by gradually increasing indoor tan-time and tanning two to three times a week. Once you have a tan, you can maintain it by tanning one or two times a week.
Generally, you will begin to notice results after a few tanning sessions, but it may take several weeks of regular tanning about three times a week to acquire a good tan. If you are developing a base tan before going on a winter vacation, please start tanning two to three weeks before you are scheduled to leave. Tanning takes place in the top layer of skin, the epidermis. This outer layer, with oxidized melanocytes, is shed every 30 days, causing the tan to fade.
Indoor heating, hot water, harsh soaps, and colder weather can hasten the fading process. Well moisturized skin, increased water intake, neutral ph soap and showering in warm water can increase the longevity of your tan. Regular tanning sessions are also needed to maintain a great tan.
It is not recommended to tan, if you are taking photosensitizing medication. These medications can greatly increase your risk of overexposure. You should also avoid tanning if you are pregnant, as the heat produced by the indoor tanning equipment can negatively affect both mother and unborn child.
Lips will burn easily and repeatedly unless you protect them with lip balms or sunscreen. The FDA requires protection for the eyes.
Night Blindness, lack of color perception, retinal ulcers and eventual blindness are consequences of not protecting the eyes. Using a towel, coins, cotton balls or regular sunglasses are not acceptable alternatives.
0コメント